磨床吸塵器 可連續24小時工作 透浦式鋁合金風機可連續3W小時無維護 噪音更低

 磨床吸塵器用于顆 粒塵 打磨 粉塵 收集，廢氣處理量，阻力小， 除塵效率高。適用于糧食、冶金、化工、鋼鐵、焦化、建材等行業的除塵。

1.此工業工業除塵系統 平面磨床干式吸塵機于砂輪灰及混合粉較多的情況;

(The special wheel cleaner to ash and mixed powder more;)

 2.此吸塵機工作電壓220V/380V,接線中不可缺相;

  (The working voltage vacuum is 220 V, wiring in cannot phase lack)

3.正常工作中可頻繁開關機;

  (Work not frequent switch machine;)

4.集塵抽屜視工作粉塵量進行定期清理,并清理完后保持密封性;

(Dust collection drawer depending on the work is regular cleaning the dust, and cleaned up the maintains after sealing)

5.檢視門視以下情況進行打開,否則保持關閉:

 (Examine the situation on the door open, or keep closed)

a.工作中明顯感覺吸力下降;

(work obviously feel suction down)

 b.內部濾袋2年保養期到時;

(internal filter bag 2 years maintenance period then)

 c.此濾袋更換時請用10%的堿水浸泡30分鐘,然后自然風干!

(the filter bag when changing, please use 10% of the buck for 30 minutes, then dry naturally!)

含塵氣體在鋁合金透浦式風機的離心力作用下進入除塵器勻流室，進入勻流室后由于氣流斷面突然擴大及氣流分布板作用，氣流中一部分粗大顆粒在動和慣性力作用下直接沉降到灰斗；粒度細、密度小的塵粒進入各濾塵室后，通過布朗擴散和篩濾等組合效應，使粉塵沉降在濾芯表面上，凈化后的氣體進入凈氣室由排風管經風機排出。設備的阻力隨著濾袋表面粉塵層厚度的增加而增大。阻力達到某一設定值時進行清灰。此時 工業除塵器 配備震塵開關，壓縮空氣以極短的時間通過氣缸帶動濾袋震動，使濾網膨脹變形產生振動，并在逆向氣流沖刷的作用下，附著在濾袋外表面上的粉塵被剝離落入灰斗中。